SEH myUTN-50, Quick Installation Manual, Page: 15 / 32

Quick Installation Guide [en] 15
Configuring the UTN Server via the InterCon-NetTool
The software InterCon-NetTool has been developed by SEH Computertechnik
GmbH for the administration of SEH network devices. You can configure the
following features via the InterCon-NetTool.
Configuring TCP/IP Parameter (IPv4)
Resetting parameters (factory default setting)
Restarting the device
Starting the myUTN Control Center
Switching from the BIOS mode into the standard mode
Proceed as follows:
1. Start the myUTN Product CD on the Windows Client
2. Select Tools - InterCon-NetTool .
3. Start the InterCon-NetTool installation file.
4. Follow the installation routine.
The InterCon-NetTool will be installed to your system.
Start the InterCon-NetTool on your client via the Windows start menu.
(Start --> Programs --> SEH Computertechnik GmbH --> InterCon-NetTool)
Detailed information on how to use the InterCon-NetTool can be found
in the Online Help. To start the Online Help, select
Help – Online Help
from the menu bar.