Working with the SEH UTN Manager
myUTN User Manual Windows
70
5.6
How to Automate Port Connections and
Program Starts
You can automate the connections to USB ports (including con-
nected USB devices) and program starts in many ways. This is done
by various automatisms.
What Do You Want
To Do?
’Permanent Port Connection after Operating System Boot
(Auto-Connect)’
’Automatically Disconnect the Port Connection after the Time
Defined (Auto-Disconnect)’
Using the Additional Tool 'utnm'
Permanent Port Connection after Operating System Boot
(Auto-Connect)
The feature automatically establishes a permanent connection to a
USB port and the connected USB device without the need for a user
to log on to the client. The connection will be
• activated upon the operating system startup and terminated
when the system shuts down
• automatically reestablished when the system restarts.
Requirements
The SEH UTN Manager (complete version) is installed on the
client; see:
The USB port is shown in the selection list; see:
You are logged on to the system as administrator.
Proceed as follows:
1. Start the SEH UTN Manager.
2. Select the port from the selection list.
