background image

11 Maintenance

Cleaning and Storage

Use a soft, wet cloth to wipe the mainframe clean. Hard to remove dirt can be scrubbed with a toothbrush and toothpaste, then cleaned 
with a soft, wet cloth. 

NOTE 

Do not wash your KickScooter with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the 
appearance and internal structure of your KickScooter. Do not wash your KickScooter with a power washer or hose. 

        

WARNING 

Make sure the KickScooter is powered OFF, the charging cable is unplugged, and the rubber cap on the charge port is tightly sealed before 
cleaning; otherwise you may damage the electronic components. 

Store your KickScooter in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to sunlight and temperature 
extremes (both hot and cold) will accelerate the aging process of the plastic components and may reduce battery life. 

10 Folding and Carrying

Folding

Step on the folding pedal while pushing 
the handlebar forward slightly.

Then fold the handlebar down 
until it locks into the rear 
fender.

When your KickScooter is 
folded up, simply lift it by the 
stem to carry.

DO NOT take your hands off the 
handlebar while riding. Do not ride with 
one hand only.

DO NOT ride up and down stairs or jump 
over obstacles. 

DO NOT touch the hub motor after riding 
because it can get hot.

DO NOT step on the folding 
pedal while riding.

     

WARNING

Always keep both hands on the handlebar or you risk serious injury due to loss of balance and falls.

Maintenance and removal of the battery

Do not remove the battery. Removing the battery is complicated and can alter the operation of the machine: You can contact an 
authorized repairer if the product is still guaranteed. If the product is not guaranteed you can contact any specialized repairer of your 
choice. You can ask for the list of the authorized repairers to the customer service available at www.segway.com. For any further question, 
you can contact the customer service available at www.segway.com.

Do not store or charge the battery at temperatures outside the stated limits (see Specifications). Do not puncture the battery. Refer to 
your local laws and regulations regarding battery recycling and/or disposal. A well maintained battery can perform well even after many 
miles of riding. Charge the battery after each ride and avoid draining the battery completely. When used at room temperature (70°F 
[22°C]) the battery range and performance is at its best; whereas using it at temperatures below 32°F (0°C) can decrease range and 
performance. Typically, at -4°F (-20°C) range can be half that of the same battery at 70°F (22°C). Battery range will recover when 
temperature rises. More details are available in the App.

Replace the Tires

 

Tires supplied with the product are to be mounted on the wheel by a professional repairer. Removing the wheels is complicated and 
incorrect assembly can lead to instability and malfunctions:
– Please contact an authorized repairer if the product is still under manufacturer guarantee. You can ask for the list of the authorized 

repairers to the customer service available at www.segway.com.

– If the product is no longer under guaranteed you can contact any specialized repairer of your choice.
– Should you have questions, you can contact customer service available at www.segway.com.

NOTE 

Typically, a fully charged battery should retain charge for 120-180 days in Standby Mode. A low-power battery should retain charge for 
30-60 days in Standby Mode. Remember to charge the battery after each use. Completely draining the battery may cause permanent 
damage to the battery. Electronics inside the battery record the charge-discharge condition of the battery; damage caused by 
over-discharge or under-discharge will not be covered by the Limited Warranty. 

        WARNING 

Do not charge or use your battery if it is damaged or see trace of water. Do not attempt to disassemble the battery. Risk of fire. No user 
serviceable parts.

        WARNING 

Do not ride when the ambient temperature is outside the machine operation temperature (see Specifications) because low/high 
temperature will limit the maximum power/torque. Doing so could cause personal injury or property damage due to slips or falls.

Others

The external flexible cable of this transformer cannot be replaced; if the cord is damaged, the transformer must be discarded and 
replaced by a new one. Should you have questions, you can contact customer service available at www.segway.com. 

In case of accident or breakdown: Please contact an authorized repairer if the product is still under guarantee. If not, you can contact any 
specialized repairer of your choice. You can ask for the list of the authorized repairers to the customer service available at 
www.segway.com. For any question, please contact customer service available at www.segway.com. 

Efforts have been made to simplify wording in the user manual for users. Where an action appears too complicated for a user, he is 
advised to contact an authorized or a specialized repairer or customer service.

15

14

Summary of Contents for Ninebot KickScooter E22 Series














Reviews: