7 Charging
8 Learning to Ride
Wear an approved helmet and other protective gear
to minimize any possible injury.
1. Power on the scooter and check the power
level. Charge the scooter if the battery level
is low.
6 First Ride
There are safety risks when learning to ride the KickScooter. You must read the Riding
Safety via the App before your first ride.
For your safety, your new KickScooter is not activated and will beep occasionally after
POWER ON.
Until activated, the KickScooter maintains a very low riding speed, and can not perform with
full function. Install the Segway-Ninebot App on your mobile device (with Bluetooth 4.0 and
above), connect to the KickScooter with Bluetooth, and follow the App instructions to
activate your KickScooter and enjoy the full performance.
Scan the QR code to download the App (iOS 9.0 and above, Android™ 4.3 and above).
Your KickScooter is fully charged when the LED on the charger changes from red (charging) to green (trickle charge).
Close the charge port cover when not charging.
2
1
Install the Segway-Ninebot App and register/login.
3
4
Click “Vehicle”
→
“Search vehicle” to connect to your
KickScooter.
The KickScooter will beep when it has successfully
connected.. The Bluetooth icon will stop blinking and
remain illuminated.
Follow the App instructions to activate the KickScooter and learn how to ride safely.
You can now start to use your KickScooter, check the status with the App, and interact with other users. Have fun!
WARNING
Do not connect the charger if the charge port or charge cable is wet. Do not charge or use your battery if it is damaged
or see trace of water.
Close the charge
port cover when
finished.
Open the charge
port cover.
Insert the
charge plug.
Charge port
Charging steps:
Power on the KickScooter. A blinking Bluetooth icon
indicates the KickScooter is ready to connect.
Charge port
(When used with
second battery)
Vehicle
Fans Moments
Me
Discover
Segway-Ninebot App
09
08
