10
Carrying
When your KickScooter is folded up, lift it by the stem to carry.
Caution
●
Be sure the KickScooter is powered off before performing any maintenance or when installing or replacing parts.
●
When installing components, use proper and sufficient force until the component is secure. If the installation is too loose or
too tight, the KickScooter may not function properly resulting in the potential for injury to you or others or damage to, or
malfunction of, the KickScooter.
●
DO NOT modify your KickScooter. Modifications to your KickScooter could interfere with the operation and performance of
the KickScooter, which may result in serious injury and/or damage, and could void the Limited Warranty. Only use Ninebot
or Segway approved parts and accessories.
Cleaning
Use a soft, wet cloth to wipe the mainframe clean. Dirt hard to remove can be scrubbed with a toothbrush and toothpaste, then
cleaned with a soft, wet cloth.
WARNING
1. Make sure the KickScooter is powered OFF, the charge cable is unplugged, and the rubber cap on the charge port is tightly
sealed before cleaning; otherwise you may expose yourself to electric shock or damage the electronic components.
2. DO NOT wash your KickScooter with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may
damage the appearance and internal structure of your KickScooter.
3. DO NOT wash your KickScooter with a power washer. DO NOT use a strong water flow or high-pressure hoses to clean the
KickScooter. Avoid getting water in the charge port. If your KickScooter has been exposed to heavy rain store it outdoors
away from buildings and people but protected from the elements until it is dry.
Storage
Store your KickScooter indoors. DO NOT store it outdoors for extended periods. The KickScooter should be stored in an
environment where the temperature is no higher than 122°F (50°C) or lower than 14°F (-10°C). If the temperature of the
storage environment is lower than 32°F (0°C), DO NOT charge it until after placing it in a warm environment (over 50°F (10°C).
WARNING
Exposure to sunlight and temperature extremes (both hot and cold) will accelerate the aging process of the plastic
components and may reduce battery life.
Battery Maintenance
WARNING
1. Only use the battery specified by the manufacturer.
2. DO NOT store or charge the battery at temperatures outside the stated limits (see Specifications).
3. DO NOT puncture the battery. DO NOT attempt to disassemble the battery. DO NOT touch battery contacts. DO NOT
dismantle or puncture the casing.
Maintenance
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
