9
Card Swipe Installation (Continued)
Step 4:
Locate the coin out ramp and position it in front where the coins are dispensed from the hopper and install the
two mounting screws.
Step 5:
Remove the coin chute plate from the door and install the coin cup with remaining hardware.
The remaining steps to finish your card swipe installation is different per card swipe system used. Refer to
your owners manual of your card swipe for further information.
The main logic board can directly control the hoppers. A wire harness from the hoppers to the main board
can be purchased form ICE Service Department. The default payout per swipe is 10 coins. This can be ad-
justed in the games settings. This game also has separate coin and ticket meters for each station located
above the main logic board. It is recommended to disconnect the meters and directly connect to your card
swipe system. Refer to the wiring diagrams from detail information.
