Sega OutRun2, Owner'S Manual

Page: 70 / 86

62
www.seuservice.com
●
Do not tightly seal the battery pack when installing it onto an external device.
Flammable gas is generated from the battery when its safety mechanism has
functioned. If you should fail to observe the above-described instruction,
sparks from motors, switches, etc. may cause the gas to fire. Therefore, install
the battery pack so that the gas can be quickly released from the external
device.
●
Do not use the battery pack for the device/usage other than this game system.
If you should fail to observe this instruction, the battery and/or the device may
be damaged due to non-applicable specifications.
●
Do not strike a nail in, hammer, step on, or apply any other forms of pressures
and shocks on, the battery.
If you should fail to observe this instruction, the battery may be deformed. As
a result, the battery may burst at its sealed sections to leak the internal liquid,
or may be short-circuited internally to overheat, make a fire, and explode.
●
Do not use a battery charger because any battery charger is not usable for this
battery pack.
If you should fail to observe this instruction, the gas may be suddenly
generated in the battery and eventually the battery may overheat, make a fire
or explode.
●
If the battery in use or in keeping shows an abnormal indication (deformation,
change of color, bursting of the armor cover, etc.), immediately stop using or
keeping it. If it leaks and smells abnormally, immediately keep it away from
fire and put it in a safety box.
●
If the liquid leaks from the battery and gets in your eyes, do not rub your eyes
but immediately wash them with clean water (city water etc.); and consult a
medical doctor for a treatment. If you should fail to observe this instruction,
the liquid may harm your eyes.
●
The battery pack armor (a polyvinyl chloride tube) may be damaged or
deformed by external force or heat. When transporting the battery pack or
replacing it with a new one, therefore, be careful not to drop or excessively
shock it. Do not continue to use any damaged or deformed battery pack. If
you should fail to observe this instruction, the battery may overheat, make a
fore, or explode.
●
The battery pack contains a printed circuit board (PCB) for protective
circuitry. It may be destroyed by the static electricity. When handling or
servicing the battery pack, therefore, take preventive measures against the
static electricity.
If your battery pack has shown destruction of a protective circuitry PCB, do
not continue to use it. If you should fail to observe this instruction, the battery
may overheat, make a fore, or explode.
●
When wiring the battery pack to a device, be careful not to apply excessive
force onto the connectors and lead wires. The battery may overheat, make a
fire, or explode if the connectors and lead wires are damaged.
●
Do not do away with the used battery packs carelessly because they may
contaminate the environment. Be sure to dispose of the used battery packs in
accordance with the laws/regulations of your country.