Sega OutRun2, Owner'S Manual

Page: 43 / 86

35
www.seuservice.com
Test the STEERING, GAS (ACCEL) and BRAKE controls to ensure that they are functioning properly and that the
parameters change smoothly as each input device is operated.
Display N, UP and DOWN using the GEAR POSITION. N displays that there is no control input. Verify that both UP
and DOWN display in sync with the position of the shift knob.
Press the START, CHANGE VIEW, SERVICE and TEST Buttons. If functioning correctly, each indicator will switch
from OFF to ON.
Press the SERVICE and TEST Buttons simultaneously to return to the Game Test Menu screen.
B. OUTPUT TEST
Select OUTPUT TEST to display the following screen and check the status of each lamp.
This test should be used periodically to check that the lamps are functioning correctly.
On this screen the cursor will switch automatically between items, lighting up the respective lamps.
<OUTPUT TEST screen>
●
START BUTTON : Lights up the START button.
●
VIEW CHANGE BUTTON: Lights up the View Change button.
Press the TEST Button to return to the Game Test Menu screen.
C. DRIVE BOARD TEST
Select DRIVE BOARD TEST to display the following screen and check the status of steering motor.
Use the SERVICE Button to select the desired test item. Press the TEST Button to activate the selected item.
NOTE: This test will not be displayed in Upright cabinet types.
OUTPUT TEST
START BUTTON
--> VIEW CHANGE BUTTON
PRESS TEST BUTTON TO EXIT