Sega Lindbergh Universal, Manual

Page: 51 / 88

Replacing the game board
13
Replacing the game board
13
● Be sure to turn the power off before touching the inside of the machine, to
prevent electric shock accidents.
● Take care not to damage the wiring. Electric shocks or short-circuit accidents
could result from damaged wiring.
● The current capacities for game boards in this product are 3.3V 12A, 5.0V 10A,
12V 2A. Never use game boards which require capacity above these values. Use
of such boards would cause overheating and ignition.
● When changing to a game board that does not follow the JAMMA standard, be
sure to use the dedicated harness specified by the game board manufacturer.
Use of anything other than the specific dedicated wiring risks causing
overheating and fire.
This manual explains how to remove the Lindbergh. Before starting work to change to a different game board,
contact the game board vendor and check it thoroughly.
To remove the game board (Lindbergh), take the entire base (wooden board), on which the game board is mounted,
out of the cabinet.
1
Use the main switch of the AC unit or the sub-power switch behind the service door to turn the power supply
off. Loosen the anti-unlocking screw to unlock the service door.
2
Remove all the connectors which are connected to the game board. Also remove all other connectors on the
base that connect to anything other than the game board. The number of connectors varies between games.
Figure 13.1a
Extract connector
WARNING
13-1 How to remove the game board
Lindburg.indb 45 2/16/2007 19:12:30