4
BEFORE USING THE PRODUCT
,
BE SURE TO READ THE FOLLOWING:
To maintain safety:
To ensure the safe operation of this product, be sure to read the following before usage:
The following instructions are intended for the users, operators and the personnel in charge of the operation of the
product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the
product
appropriately. Be sure to keep this manual close to the product or in a convenient place for future reference.
• Perform work in accordance with the instructions herein stated.
Instructions for work
are explained by paying attention to the aspect of accident prevention. Failing to perform work as per
the instructions can cause accidents. In the case where only those who have technical expertise should
perform the work to avoid hazardous situation, the instructions herein state that the site maintenance
personnel should perform such work.
• Be sure to turn off the power before working on the machine.
To prevent an electric shock, be sure
to turn off the power before carrying out any work that requires direct contact with the interior of the
product. If the work is to be performed in the power-on status, the Instruction Manual herein always states
to that effect.
• Be sure to ground the Earth Terminal
(This is not required in the case where a power cord with earth is
used).
• This product is equipped with the Earth Terminal.
When installing the product, connect the Earth
Terminal to the "accurately grounded indoor earth terminal" by using an earth wire. Unless the product is
grounded appropriately, the user can be subject to an electric shock. After performing repair, etc. for the
control equipment ensure that the Earth Wire is firmly connected to the control equipment.
• Ensure that the Power Supply used is equipped with an Earth Leakage Breaker.
This product does
not incorporate the Earth Leakage Breaker. Using a power supply which is not equipped with the Earth
Leakage Breaker can cause a fi re when earth leakage occurs.
• Be sure to use fuses which meet the specified rating
(
only for the machines which use fuses
).
Using
fuses exceeding the specified rating can cause a fire and an electric shock (only for the machines which
use fuses). Using fuses exceeding the specified rating can cause a fire and an electric shock.
Specification changes (removal of equipment, conversion and/or addition) not designated by SEGA are not
allowed.
The parts of the product include warning labels for safety, covers for personal protection, etc. It
is hazardous to operate the product by removing parts and/or modifying the circuits. Should doors, lids and
protective parts be damaged or lost, refrain from operating the product, and contact where the product was
purchased from or the office herein stated. SEGA shall not be held responsible for any accidents, compensation
for damage to a third party, resulting from the specifications not designated by SEGA.
Summary of Contents for Hot Racer
Page 11: ...3A CAUTION WARNING STICKERS 5...
Page 16: ...WIRING DIAGRAM 10...