Sega Crazy Taxi High Roller, Installation & Service Manual

Page: 54 / 115

53
6.2. SYSTEM TEST MODE
6.2.1. EXPLANATION OF TEST AND DATA DISPLAY
Perform the tests and data check periodically when installing the machine initially or collecting cash, or when
the machine does not function correctly. Perform checks in accordance with the explanations given in this
section.
The following shows tests and modes that should be utilized as applicable.
This product's basic system consists of the Chihiro game board and the GD-ROM drive. The system
enables you to play several games one after the other just by changing a GD-ROM disc that is to be set on
the GD-ROM drive.
Therefore the product supports, the following 2 test modes:
(1) System test mode for an automatic self-diagnostic test (generally used by every product that contains
the basic system) and a coin assignment (specifically used by this product)
and
(2) Game test mode for testing the input/output control devices and setting the difficulty level (specifically
used by this product).
· Any settings that are changed by users during TEST MODE are saved upon
exiting TEST MODE with the EXIT command in the SYSTEM MENU. If the
unit is powered off prior to exiting, changes to settings will not take effect.
· You may not enter GAME TEST MODE while the unit is reading from or
checking the GD-ROM. If error messages are displayed when exiting TEST
MODE, you should power the unit off and on again.
·
In the manual for this product, "Media Board" and "DIMM" are one and the
same.
·
Use with the specified settings. If settings other than those specified are
used, inappropriate operations or malfunction may occur.