Sega BG-X005SGA, Manual

Page: 5 / 20

Assembly Instruction
Step 1 Remove the 4 legs from the box screw the leg levelers onto it. Attach
onto the bottom of the table Align the holes of legs to the holes on
the bottom of the table, and then secure it with big flathead
and flat
: ;
.
screw (5mm x 35mm)
washer (8mm x 16mm)
leg levelers x 4
roundhead screw (8mm x 25mm)
flat washer (8mm x 16mm)
Step 2 Once the legs are tightly
screwed on to the table base,
flip and position the table by
90 degree angle this action
would require at least 3~4
people, then flip it again in
same manner to conclude
with the upright position as
shown on the diagram:
:
;
FINISHED PICTURE
4.