Assemble Instruction
Step 10 Tightly screw on the plastic bar bracket cover on both sides with 4
big flathead
screw
mm x
mm
The center guard needs to be attached into the
upper
holes of the plastic bar bracket cover
:
( )
(5
35
).
(2)
.
Center guard needs to be attached into
the
upper holes
2
Use 4 big flathead screw (5mm x 35mm)
Step 9 Use the open cut side of the overhead bar plastic cover, and then insert it into the
overhead bar protection cover. Lastly attach the whole cover onto the side panel
Before attaching it on ensure the overhead bar is placed into the open cut of the
overhead bar plastic cover Then cover it with the overhead bar protection cover.
:
-
.
,
-
.
FINISHED PICTURE
Open-cut
Place the plastic bar bracket cover onto the
overhead bar plastic cover
Plastic cover with the plastic bar bracket cover
then place the set onto the overhead bar
9.
Summary of Contents for BG-X005SGA
Page 1: ...BG X005SGA MANUAL...
Page 20: ......
