SEGA ENTERPRISES Confidential Mission, Owner'S Manual

Page: 30 / 113

Firmly insert the power plug into
the socket outlet.
Insert the opposite side of Power
Cord plug to the AC Unit's
connector ("INLET").
Perform wiring for the Power Cord
and Earth Wire. Install protective
covering for the Power Cord and
Earth Wire.
FIG. 6. 4 c Connecting Power Cord and Earth Wire
FIG. 6. 4 b Earth Wire Connection
Connect one end of the earth wire to the AC
Unit earth terminal, and the other end to the
indoor earth terminal. The AC Unit earth
terminal has a Bolt and Nut combination.
Take off the Nut, pass the earth wire through
the Bolt, and fasten the Nut.
Note that the Earth Wire is incorporated in
the Power Cord for the Areas of AC 120V
(USA) and AC 220 ~ 240V, and therefore,
this procedure is not necessary.
Wiring Cover
Connect the Earth Wire
to the Earth Terminal.
In case the Power Plug is apt to come out of place, secure the
Power Cord to the periphery of the AC Unit with the Cord
Clamp (an accessory).
HOW TO USE THE CORD CLAMP
2
3
4
23