57
04/2020
it to the power supply before you have
not completely removed all packaging
components and transport locks.
• Charge the device with 100 - 240V~,
50/60 Hz AC voltage only. All power
supply cables that are damaged must be
replaced by a qualified specialist (electri-
cal engineer). Do not use power strips,
multiple sockets or extension cords to
connect the device to the power supply.
• You need a power socket that is proper-
ly grounded and exclusively assigned to
the device. The socket must be fused
with a 10 A fuse or higher. Failure to do
so may result in dangerous accidents or
equipment damage.
• The mains plug and the earthed socket
must always be easily accessible after
the device has been installed.
• Make sure that the power cable will not
be damaged when located under the
device or when moving the device.
