5.2
Special Keys During Power-on
Some keys have a special functionality when being pressed during the power-on /
boot process.
• »↵« during power-on – After a confirmation dialog, the DiggiMEC enters a special
•
“Service Mode”. This operating mode allows for installing a new firmware on the
DiggiMEC.
• »Reset« during power-on – After a confirmation dialog, the WIC1 enters a special
•
“Service Mode”. This operating mode allows for installing a new firmware on the
WIC1.
• »✕« during power-on – After a confirmation dialog, the WIC1 resets all settings to
•
the respective factory default.
This is the same functionality as the Direct Control [Service / General] »Factory
Reset«.
WARNING!
As long as you are running in „Service Mode“, your equipment is protected only by the
Backup protection, not by the user settings.
This means that the Backup Protection of the WIC1, especially the DiggiMEC‑xxxxxx1
(“Backup Protection trip as soon as possible”) variant, might output a trip pulse.
Therefore it is strictly recommended to always enter the „Service Mode“ only with the
breaker opened (or disconnected).
21
DiggiMEC
DIGGIMEC-1.0-EN-MAN
5 Navigation – Operation
5.2 Special Keys During Power-on