SEFAM EcoStar, Practitioner And Home Care Provider Manual, Page: 7 / 26

EcoStar Ramp feature

7
Ramp feature
The Ramp feature allows for a gradual rise in pressure.
1.
To start the ramp feature, press the
on/off button .
The ramp indicator is displayed and
compliance recording begins.
The pressure level will gradually increase
from the comfort pressure to the level of
prescribed pressure.
Note:
If the ramp time is set at zero, the ramp
feature is disabled.
2.
To turn the ramp feature off, press the
ramp button
.
You can adjust the comfort pressure and the ramp time. Refer to "Settings" on page 8.
Device settings
The three buttons on the front of the device
allow access to the device settings and are
used to change the value of certain
parameters.
The parameters accessible on the screen
when the machine is in standby or operating
mode are:
 parameters of the device relating to
treatment

the compliance data which has been
recorded.
Each screen of the practitioner settings menu
includes:
 an upper section indicating the value of
the parameter displayed

a lower section with various symbols
indicating the device's operating mode or
the nature of the parameter displayed
(see table entitled "Description of symbols
displayed on the screen").