Seepex BCSB 025-12 Operating And Assembly Instruction Manual Download Page 43

Page: 43 / 62

Dismantling / Reassembly

Ausgabe
issue

D / 30.08.2012

Dokument
document

OM.PJT.02e

Blatt
sheet

3 (5)

9.2.2.3 Plug-in shaft (307)

9.2.3 Rotating unit (RTE) - individual parts - reassembly

9.2.3.1 Coupling rod (400) - reassembly



Slide the universal joint sleeve

(405)

and holding bands

(406, 407)

onto coupling rod

(400)



Fit the diameter and width of the holding band of the universal joint sleeve.



Fill the joint head with seepex joint grease.

Rotor (600)



Remove any damage.



Clean rotor

(600)

Tool (

/assembly mandrel)



Press in guide bushings

(403)

(depth = 2/3).

–

Use tool

(W4)

NOTICE

Malfunction of the joints.

Malfunction and/or destruction of joints.



Replace coupling rod pins

(402)

and guide bushings

(403)

jointly.



Insert coupling rod pins

(402)



Slide on retaining sleeve

(401)



Connect rotor/coupling rod.

Tool (

/drift)



Slide in the coupling rod pins

(402)



Knock the guide bushings

(403)

in.

–

Use tool

(W5)

Summary of Contents for BCSB 025-12































































Search results

Summary of Contents for BCSB 025-12

Reviews:

Related manuals for BCSB 025-12

Brands by name

Popular brands

Seepex BCSB 025-12, Operating And Assembly Instruction Manual

Search results

Summary of Contents for BCSB 025-12

Reviews:

Related manuals for BCSB 025-12

Brands by name

Popular brands