Quick Installation Guide
English
SEEnergy
“Plus”
Series
Network Video Recorder
10
Connect to the NVR
There are various ways you can connect to the NVR and below are
the suggested methods for different network setup:
•
The NVR is placed in a network with a DHCP server: Connect to
the NVR by using
“SEEnergy Device Search” Utility
•
The NVR is placed in a network without DHCP server (or you are
connecting to it directly):
Access the NVR with its default IP
Use SEEnergy Device Search Utility
If the NVR is placed in a corporate network or a local area network
where a DHCP server is already presented, run the “SEEnergy Device
Search” utility from a computer that is on the same network and
locate the NVR with its IP address that is assigned by the top-level
DHCP server.
To begin, launch the “SEEnergy Deivce Search” utility from the CD
and proceed with the installation:
