Seenergy Dandy, User Instructions

Page: 13 / 56

- 13 -
even with any of the 1-2-3 speeds engaged (except the Intense
function speed). When the Timer function is active, the set
speed must flash on the display when the timer is activated.
After 15 minutes, at the end of the countdown, the hood
switches off (motor and any lights remain on).
If the intense speed is engaged, the Timer cannot be activated.
- If you wish to deactivate the function before the 15 minutes,
press the
E
button.
F Button = Switches the lights on/off.
• Anti-grease/active charcoal filters saturation:
- After 30 h of operation, when the C display flashes, alternating
the working speed with the letter
F
(i.e.
2
and
F
), this means
that you need to wash the anti grease filters .
- After
120 h
of operation, when the
C
display flashes, alterna-
ting the working speed with the letters C/F (i.e. 2 and C/F ), this
means that you need to wash or replace the charcoal filters .
- Once you have repositioned the clean filter, you need to reset
the electronic memory with the hood on, pressing the B button
for about
3 seconds
.
After that time, the letter E appears on the display (reset
confirmed) and the hood switches off.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY
FOR EVENTUAL DAMAGES CAUSED BY BREACHING THE
ABOVE WARNINGS.