5
6.
Specifications
MODEL
SC-VTD0001A (Transmitter)
Video IN
CVBS 1.0Vp-p, 75Ω Term.
Transmission Bandwidth
8MHz
Data LED
Tx: Green/ Rx: Yellow
Transmission Distance
Max. 1 km (with RG-6)
Connection Port
Video IN: BNC-F
Video OUT: BNC-F
DATA: RS-485/ Half Duplex, T. Block
Alarm In/Out:
Input 1CH/ Output 1CH
Power
AC 24V, DC12V/ 200mA
Temperature/Humidity
-10
℃
~ +50
℃
/ 0 ~ 80%
Case Body / Weight
Aluminum / 130g
Dimension (mm)
75(W)
ⅹ
60(H)
ⅹ
25(D)
MODEL
SC-VRD0001A (Receiver)
Video Out
CVBS 1.0Vp-p, 75Ω Term.
Power
AC 24V, DC12V/ 200mA
Data LED
Tx: Green/ Rx: Yellow
Transmission Distance
Auto Adjustment
Connection Port
Video IN: BNC-F
Video OUT: BNC-M Harness (60cm)
DATA: RS-485/ Half Duplex, T. Block
Alarm In/Out:
Input 1CH/ Output 1CH
Temperature/Humidity
-10
℃
~ +50
℃
/ 0 ~ 80%
Case Body / Weight
Aluminum / 140g
Dimension (mm)
75(W)
ⅹ
60(H)
ⅹ
25(D)
7.
Precautions
Please turn the power OFF prior to the installation of the device.
The data error can be occurred where the installation circumstances are
harsh enough such as the higher voltage, container belts, etc.
Do not install or use these units in a humid, hot or hazardous explosive
environment without suitable and adequate protection.
Do no expose these units to magnetic materials, high frequency radio
waves.
Avoid exposing the units to direct sunlight or into an unstable environment.
Don’t drop the product or subject it to shock.
Don’t modify or disassemble the product.
The installation should be made by a qualified service person and should
conform to all local codes.
The transmission cable has to be used “Standard Coaxial Cable such as RG-
59, RG-6, RG-11, etc.” only. Please use BNC connector when connecting
the coaxial cable to the transmitter and the receiver units.
If there is any malfunction in the device, please contact your distributor
immediately.
