Release Version 1.1
1
Precaution and Safety Guidelines
The content of this guideline is intended to protect user safety and prevent property damage.
Please read these operating instructions carefully and use the device properly.
Warning
(If you do not keep any of the below guidelines, you may get
seriously injured or cause somebody’s death.)
■ Be sure to install the product after unplugging power cord. Also, do not use many power
plugs at the same time.
- It may cause abnormal heat, fire and electric shock.
■ Do not leave the device in a place where water will fall or splash. Also, do not place anything
with water on it, such as a vase of flowers.
- A malfunction or fire may result if liquid gets inside the device
■ Do not bend the power cord by excessive force. Make sure the power cord is not crushed by
heavy things.
- It may cause fire.
■ Do not open the lid arbitrarily as this device has high voltage part inside. Never disassemble,
repair or modify it.
- Abnormal work could result in fire, electric shock, and injury.
■ Do not install this product in places with high humidity, dust, or soot.
- It may cause electric shock and fire.
■ Do not tug at the power cord section or unplug the power plug with wet hands. If the power
cord is loose, do not plug in.
- There may be a risk of fire and electric shock.
■ Always keep the location clean and dust-free during or after installing the device. When
cleaning the device, be sure to wipe it with a dry towel and do not use water, thinner, or organic
solvents.
- It may cause malfunction or fire
■ Keep the device in a cool place where doesn’t let direct sunlight. Keep it at a proper
temperature and avoid heating appliances like candle or heater. Also, keep the equipment or
tools away from places where people come and go.
- There is a risk of damage to the surface of the device and a risk of failure, electric shock or fire.
■ Pay attention to possible hazards in the workplace, such as wet floor, ungrounded power
extension cables, old power cords and a lack of safety earth. Consult your place of purchase or
professional if problems arise.
- It may cause fire and electric shock.
■ Concerning the input voltage for operating this device, a voltage range must be within 10%
of rated voltage. Also, do not use a heat source such as a hair dryer, iron and refrigerator to the
same power unit.
- It may cause abnormal heat, fire and electric shock.
■ When thunder or lightning strikes, please pay attention to the safety and unplug the power
cord.
