SeeEyes SC-16HDS, User Manual, Page: 6 / 24

5
6. You can watch two equal pictures through two BNC-F terminals of
Monitor port.
④
HDMI: Connect the HD (High Definition) Monitor with HDMI input port.
⑤
VGA: Connect the Monitor with the VGA input
(Only SZGA, WSXGA mode are available.)
⑥
MOUSE: Connect the mouse.
⑦
RJ-45: Connect the Firmware Upgrade device.
⑧
,
⑨
Serial Port: Connect the RS-232C/ RS-485 to link an external device.
- Data configuration
- Packet structure (Control Communication Data format)
Byte Value Function
1 0xA0 STX (Launching Data)
2 0x00 ~ 0xFF 0x16 (Device Code)
3 0x00 ~ 0xFF Address (Device ID)
4 Data byte Control Data
5 Check Sum Check Sum = Byte2 + Byte3 + Byte4
- Control DATA Code
NO Hex ASCII Function Remarks
1 0x30 ~ 0x39 0 ~ 9 Display in Full CH 01 ~ 09 Full Display Control
2 0x41 ~ 0x46 A ~ F Display in Full CH 11 ~ 16
〃
3 0x47 G Multi Screen
〃
4 0x48 H Menu
5 0x49 I Enter
6 0x4A J ESC
7 0x50 P Display in quad (4 split) Display Control
8 0x51 Q Display in six splits
〃
9 0x52 R Display in nine splits
〃
10 0x53 S Display in ten splits
〃
11 0x54 T Display in thirteen splits
〃
12 0x55 U Display in sixteen splits
〃
13 0x5A Z Auto Sequence
14 0x64 d Down Menu move
15 0x6C l Left
〃
16 0x72 r Right
〃
17 0x75 u Up
〃
18 0x6D m Minus Set Value change
19 0x70 p Plus
〃
⑩
Input Power: Connect the power cable.
Data bit 8
Stop bit 1
Parity No
Baud rate 9600bps