5
⑤
AUTO
SEQUENCE
Press this button, auto sequence mode start. Press the button
again, auto sequence mode stop.
⑥
FREEZE
Press this button and “Freeze Mode” is activated as LED light is
on, and then press the “Camera Select” button and the selected
camera freeze temporarily. Press this button again, exit the freeze
mode.
⑦
LIVE P.B
To playback the VCR, press this button.
To exit this mode, press this button again.
⑧
MENU
“SETUP MENU” display when press this button.
⑨
ENTER
At „SETUP MENU‟ status select the „MENU‟ by press the „ENTER‟.
※
Auto Sequence
Full Screen 4 split mode
3.1.2 Rear Side
※
According to version of model, the rear side may differ from the image.
①
Camera In
: Video Input
②
Monitor Output
③
Loop Through
: Video Loop Through Output (DVR or Matrix)
④
VCR In/Out
: receives video signal from VCR, and outputs the signal to
monitor.
⑤
Serial Port
: RS-232 / RS-485 Communication
3.2 Communication Way
Remote control is available through RS-232/485 COM.
Control Protocol is compatible with SDM-16, In the Menu -> Miscellaneous
-> Remote Control. It is possible to select SDM-16 or RS-232 and RS-485.
SC-16DS Remote Control Command
①
CAMERA IN
Ⅹ
16
②
Monitor Output
③
Loop Through
④
VCR IN/OUT
⑤
Serial Port
