Release Version 2.0
5
④ AUTO:
To enable auto sequence mode.
Once you press this button in the split mode for a second, the green LED will be on, the video will be
displayed from 1CH to 4CH in full screen successively.
Once you press this button for a few seconds in the cropping mode of a vertically two-split mode,
the LED will be flickering and a red circle will be shown in the relevant channel. After then, you can
shift the relevant video to another position by using the up/down/left/right keys and save it by
pressing this button for a few seconds again.
Once you press this button in the auto sequence mode again, the green LED will be off and the auto
sequence mode will be terminated. In the menu. It is possible to enter the upper menu or cancel the
settings via this button.
Split Mode
Split Screen
Auto Sequence
⑤ QUAD:
To turn to the horizontal/vertical 4-split (quad) screen mode.
The green LED will be on when pressing this button in the split mode.
Split Mode
Split Screen
Vertical 4-split
mode
Horizontal 4-split
mode
Vertical 3-split
mode
⑥ SINGLE DISPLAY 1:
To display the channel 1 in full screen and select a channel to crop in general.
To move to the top in the menu mode.
⑦ SINGLE DISPLAY 2:
To display the channel 2 in full screen and shift the cropped image in general.
To move to the right in the menu mode.
⑧ SINGLE DISPLAY 3:
To display the channel 3 in full screen and select a channel to crop in general.
To move to the bottom in the menu mode.
⑨ SINGLE DISPLAY 4:
To display the channel 4 in full screen and shift the cropped image in general.
To move to the left in the menu mode.
※ If the signal type of input video is both NTSC(30fps) and PAL(25fps), it is recommended to
use the same kind of video because NTSC images on the split screen may be unnatural.
※ How to use the CROPPING function (VIDEO SCALE 16:9)
The cropping function enables in the vertical 2-split modes only. Press the DUAL key to display the
video in 16:9 (or 4:3, Full) and press the key again to display the center image and “CROPPING
MODE” message in the center (This message will disappear within three seconds).
