SeeedStudio Wio Tracker, Manual

Page: 10 / 20

3/19/2019 Wio Tracker - GPS, BT3.0, GSM, Arduino Compatible - Seeed Wiki
http://wiki.seeedstudio.com/wio_gps_board/ 10/20
Getting Started - Arduino IDE
First you need to install the latest Arduino IDE, and ADD Seeeduino SAMD to your
Arduino IDE [http://wiki.seeed.cc/Seeed_Arduino_Boards/] .
Install the Driver (For Windows)
When the rst time to insert the board, you should get a USB COM device name Wio
Tracker that need to install a driver. Click
here
[https://github.com/SeeedDocument/Seeeduino_LoRa/raw/master/res/driver.zip] to
download driver for the board.
To make sure the driver was installed successful, open your Device Manager to see
if Wio Tracker exists.
Install the library of Wio Tracker(For Windows, Linux and Mac)
Click here [https://github.com/Seeed-
Studio/Seeed_Wio_GPS_Board/archive/master.zip] to download the library(zip le)
of Wio Tracker and import the zip library into your Arduino IDE. If you are new to this,
please click
here [https://www.arduino.cc/en/Guide/Libraries#toc4] for more
information.
A4 YES YES Check
battery
Note
All pins can act as Digital Input and Output

Note
This chapter is based on Win10 and Arduino IDE v1.6.0
