Interface Function
①：
Micro USB
②：
Reset button
③：
Analog Ports: Analog sensors can return readings ranging from 0 to 1023.Compared
with digital sensors that only return 0 or 1, analog readings are more detailed and precise.
④：
I2C Ports:I2C is a low-speed bus protocol that transfers data via two wire : SCL and
SDA . SCL is the clock line that synchronizes data transfer over the I2C bus, and SDA is
data line.
⑤：
Digital Ports: Normally, they are used when reading a digital sensor that only
outputs 0 or 1,or turning on or off an actuator.
⑥：
UART Port:we can control serial device by this port.
Driver Install
Seeeduino Lotus is used CH340 to download .It need to install driver.
Windows/Linux
Totally compatible with serial application program in computer endpoint Windows operation
system
1)You plug it to computer by USB Port.
2)Wait a minute,you can find it in Device Manager.
3)If you can not find the port,please download Driver from
Here
