MR24HPB1
15
⦁
Status operation mode
In this mode, the radar module periodically reports humans' presence and movement
status in the current radar detection area. The main statuses include
1) unoccupied.
2) occupied, stationary.
3) occupied, active.
During the status operation mode, the radar module performs internal logic
discrimination to determine the environmental status's accuracy. The radar module
status output logic is as follows;
Radar can only produce a corresponding state output when it detects the change
in state; otherwise, it remains inactive.
The radar rapidly switches from an unmanned to a manned state (moving,
approaching, and far away), and the switching time is ≤ 1 second.
Whenever the radar is switched from manned to unmanned mode, it needs to be
confirmed many times, and the switching time is ≥ 1 minute;
6. Typical Application Modes
This module has many applications, including house appliances, energy-saving light
control, health care, etc. Following are a few examples of typical applications.
6.1. Smart Home Appliance Application
The radar is installed inside the home appliance equipment and records the status of the
personnel working on the appliance equipment in real-time. By adjusting the equipment's
working mode (working, low power consumption, standby, shutdown, etc.) in real-time or
quasi-real-time based on the status of the working face (manned/unmanned, active/static,
close / far away), the appliance becomes intelligent.
The radar is installed inside the appliance and monitors the working surface of the
appliance in real-time. The appliance adjusts its operating mode (working, low power
consumption, standby, off, etc.) in real-time or quasi-real-time based on information
based on the working surface personnel (occupied/unoccupied, active/stationary,
close/away).
