SARK-110
User’s
Manual
Rev 1.3.8 30 July 2018
- 10 -
© 2011-2018, Melchor Varela
–
EA4FRB
2.3 Means of Input
There are four buttons and two navigation keys on the SARK-110.
Navigator A
Navigator B
Run/Hold
Select
Save Screen
Save Conf.
é
•••
ê
-
•••
+
Ø
||
SARK-110
Navigator A
Navigator A is used to navigate within the main menu.
Navigator B
Navigator B is used for changing the value of the active option in the main menu (for Freq, Span,
Marker1, Marker2, LeftY and RightY) and to navigate within the popup submenus.
Run/Hold [
►||
]
The Run/Hold button is used to control the operating state of the SARK-110: Running or
Holding. In the holding state the signal generator and measurement circuits are inactive.
Ø
Note
: when loading a stored data file the analyzer is automatically placed in a
holding state.
Select [
■
]
The button is used to activate the popup submenu associated with the highlighted option and for
selecting the desired option within the popup submenu.
Ø
Note
: Pressing any other button will cancel a selection.
Save Screen [
●
]
The Save Screen button is used to take a screenshot of the current screen. The screenshot is
stored on the internal flash disk.
Ø
S
ince firmware version v0.10.7, Save Screen [●] button can be used to launch
Setup menu if pressed for few seconds.
