Seeed Technology Co., Ltd ReSpeaker Core v2 User Guid
Notice to Host Manufacturer
Host Manufacturer who integrate this transmitter into a non-
accessible enclosure, it’s acceptable to label the
device with the FCC identifier such as “This product contains transmitter FCC ID Z4T-RESPEAKERV2.” to
avoid duplicated FCC Equipment Authorization Procedure when following conditions are satisfied:
--The transmitter is limited to installation in mobile application, a separate approval is required for all other
operating configurations, including portable configurations with respect to Part 2.1093.
--No any modifications done to the transmitter when the end-user device integrate this transmitter into it.
--Only antennas already approved with this device are used, and shall be in accordance with all grant
conditions and installation requirements.
--Host manufacturer shall apply SDoC testing to ensure that the device still complies corresponding FCC
Rules. SDoC compliance statement set out in Section 2.1077 shall be implemented properly.
--Host manufacturer provides appropriate Part 15 user and labeling information including any appropriate RF
exposure warnings:
Labeling Instruction for End User Device Integrator
Section 15.19 Labelling requirements shall be complied on end user device. Integrator shall bear the
following statement in a conspicuous location on the device:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Labelling rules for special device( too small or limitation of nature, please refer to §2.925, § 15.19 (a)(5).
For E-label, please refer to §2.935.
Instruction for indicating compliance info in End-user Device manual
Information to user required in Section 15.105 and Section 15.21 shall be included in user’s manual or
instruction manual of Final product properly.
