7
■
TM should be installed perpendicular. When installing in an angle, angle shall be no more
than 30°.
Tilt of 30
°
or less
■
When installing the TM in a slanted panel in an angle of more than 30 degrees, use forced
air cooling and design so that the monitor display area is within the specified operation
temperature.
2.3.2
Installing the Gasket
Please install the gasket even in environments where it may not seem necessary.
*
Gasket will be installed to the unit before shipment. Make sure it is properly installed before
use.
*
A gasket used for a long time or have once been installed may have scratches or dirt on it
and could have lost much of its protection effect. In order to maintain stable protection effect,
be sure to change the gasket on a regular basis.
Gasket
Groove
Insert gasket along the groove