Powerstick
3 Safety instructions
6
If the loudspeaker is connected to a power source in which the volt-
age is too high, a protective mechanism is triggered which reliably
safeguards the amplifier module and DSP. Once triggered, the pro-
tection must be renewed by a qualified service technician.
Never open the housing. There are no user serviceable parts inside.
Do not expose the Powerstick to rain, and avoid operating in envi-
ronments below -5° C or above 40° C. Be aware of the possibility of
condensation forming inside the housing due to rapid changes in
temperature. Allow the Powerstick to adjust to ambient temperature
before operation. Leave the device switched on if operating in unfa-
vorable conditions.
To prevent overheating, do not operate the Powerstick in the direct
vicinity of strong heat sources, and avoid direct sunlight. After long
periods of operation, the housing, particularly metallic components
such as the rear panel and the connector panel, can reach tempera-
tures exceeding 40° C.
