INSTALLATION
MOUNTING:
1. Find a suitable location on the dash board, windshield or headliner to mount the SV-
8150.HD monitor. Make sure that wherever the location is, it will not obstruct the
driver’s view.
2. Remove the backing from the 3M double-side tape and press the tape flat against the
mounting surface. Make sure the mounting surface is clean so the tape will make
good contact.
3. Route the wiring harness under the dash board to make the power and video
connections.
SV-8150.HD
Monitor
Windshield
SIDE VIEW
3M Double-Side Tape
WIRING:
1. Route the monitor’s power / video harness underneath the driver’s side of the dash
board to make your video and power connections
2. Route the YELLOW RCA video plug of your reverse camera up the side or middle of the
vehicle and plug it into the Yellow RCA connector of the SV-9151 monitor
3. The other YELLOW RCA can be used for a secondary video source such as a DVD
player
4. Plug-in the power adaptor to the RED power plug of the monitor. Connect the RED wire
to the 12 volt reverse light wire and connect the BLACK wire to chassis ground.
