NOTE:
This monitor is powered by the ignition when the key is on but the monitor itself will not
open into position until it receives a video signal. Make sure the reverse camera or whichever
video source you are connecting the monitor to is power up and working otherwise the monitor
will not operate.
TECH SUPPORT: (800) 998-6880
DISCLAIMER
:
Under no circumstances shall the manufacturer or distributor of the Securview™ be held liable for
consequential or incidental damages sustained in connection with the use of the Securview™ Rear
Vision System. The Securview™ is designed as a safety enhancement device and is in no way intended
as a replacement for rear-view mirrors, side-view mirrors or physically checking the surroundings when
backing a vehicle. Always check surroundings for safety when backing! Objects on the monitor are
closer than they appear. For the best fit, modification of the vehicle license may or may not be
necessary. It is the sole responsibility of the vehicle owner to check and verify any and all State or
Federal Motor vehicle codes with regards to modifications of vehicle license plates. The manufacturer of
the Securview™ assumes no liability or responsibility whatsoever with regards modifications of the
license plate.
www.crimestopper.com
[email protected]
Phone (800) 998-6880
FAX (805) 581-9500
© 2012 Crimestopper Security Products
3-30-2012
SPECIFICATIONS:
Motorized Full Color LCD Monitor
Supply Voltage:
+12VDC
Dimension:
4"(L) × 3⅜"(W) × ¾"(D)
Power Consumption:
50mA ~ 350mA
Weight:
10 Oz.
Operating Temp:
32°F - 140°F (0°C - 60°C)
Resolution:
800 x 480
Storage Temp:
-40°F – 185°F (-40° to 85° C)
Screen Size:
4.3 Inches
Video System: NTSC / PAL
