15
Appendix2: Device Upgrade
Steps:
1.
Upgrade Preparation:
Once the drivers have been installed
, access the keyboard USB with the PC, it will
prompt that
device
has been
discovered and auto load the corresponding drive
r.
Make sure the keyboard is in USB keyboard mode before upgrading the device. If the single indicator
on the panel does not light, press and hold the
Window/Channel
key for more than 5 seconds to
switch to the USB keyboard mode.
2.
Search Device:
Open the KeyBoardDemo software and click refresh device, the device list will display
the current accessed keyboard. (The client should be closed). Remember the
corresponding serial number (e.g., COM3) of the keyboard in the list, which will be
used for upgrading the device in the following steps.
3.
Start Upgrading
Before sending the command, make sure your PC has installed the serial port tool with
Send Ymode
functions, e.g., SecureCRT should be 6.5.0 or a later version.
Select one device and click to upgrade it. It will prompt the window as below after the
upgrade order is sent from the DEMO. Click
YES
.
ST-USB-KB
USER MANUAL
