13
2.5 Attaching the dome to the bracket
Step 1
:
Locate the small plastic bag
containing the O-ring,
adapter, screws, and small screwdriver as illustrated.
Step 2
:
Install the O-ring onto the wall bracket as illustrated.
Step 3
:
Install the adapter onto the top of the dome as
illustrated.
Step 4
:
Suspend the dome to the bracket using the stainless
hook as illustrated.
Step 5
: C
onnect the end of the wiring harness protruding out
of the bracket to the mating connector on the dome
unit. Observe proper orientation of the connectors as
illustrated.
Step 6
:
Push the dome into the bracket and align the holes.
Using the supplied screws (with the two rubber
O-rings) secure the dome in place as illustrated.
When finished the dome should look like the illustration on
the right ready to be powered up.
Note: It is important that you set the dip switch settings
for the dome address and communication
parameters and protocol BEFORE you install the
dome in its physical location of operation.
