Camera(SM-302TX) and Receiver(SM-302RX) Setup
4601 E. Airport Dr. Ontario,
CA 91761, U.S.A.
Tel: 888-977-3777
Fax: 909-230-6889
Email: [email protected]
All trademarks or registered trademarks are properties of
their respective owners. All rights reserved.
www.securitymaninc.com
3. Press the Power ON/OFF button located on the front
panel of the receiver and the CH1 indicator lights up
green.
Note: CH2 indicator light, CH button, #1/#2 dip switch, and
ML dip switch is not in use and are not designed for this
model of receiver.
4. Connect the AV cable to the iCamDVR video and
audio input, match yellow to yellow and red to white.
1. Find a suitable location about 10~15ft away from the
receiver and plug in the power adapter for a quick test
prior to mounting the camera. Connect the adapter
plug (DC 8V 300mA) to the camera, the other end to AC
electricity outlet, as shown above.
2. Connect one end of AV (red, yellow) cable to receiver,
other end into the video/audio inputs of the iCamDVR,
as shown in step 4 below. Then connect adapter plug
(DC8V 300mA) to receiver’s power jack, as illustrated
above.
iCamDVR1W
1 wireless camera system for video recording and
remote monitoring from PC