7
<ADDR SETTING>
ADDR SETTING
Menu function descriptions
ADDR TYPE
Sets either HARD and SOFT addressing; Choosing
HARD will set the dome to address 1. Choosing SOFT
allows the address to be set in the menu, below.
ADDR SOFT
If SOFT is selected above, enter the desired address
here. The address range is 1~254.
ADDR HARD (1)
Always displays the DIP switch address (1)
BACK
Returns to main menu.
RESET
Restore the factory default settings.
EXIT
Exit the menu
Note:
Immediately after setting a new “soft address” the camera will no
longer respond on the previous address. Make sure to set the PTZ
controller to the new address to regain control of the camera.
Access to the internal DIP switches requires extensive disassembly of
the camera. It is highly recommended to use “soft” addressing.
<MOTION>
MOTION
Menu function descriptions
SET FRAME SCAN
Set the left and right limit points for a LR scan.
POWER UP
Set which action the camera performs on boot-up.
PARK TIME
How long the dome must sit idle before the PARK
ACTION is taken.
PARK ACTION
Perform an action when the camera is idle.
FRAME SCAN SPEED
Set the L/R scan speed of the camera.
Range: 1 (Slowest) ~32 (Fastest).
RANDOM SCAN
SPEED
Set the intermittent scan speed of the camera.
Range: 1 (Slowest) ~32 (Fastest).
BACK
Return to the main menu.
EXIT
Exit the menu setting.
