V2.0 7-31-12
18
and enter auto flip set.
4. Use Up/down P/T to select and change this function to ON or OFF.
5. Press
the
[OPEN]
key to save and exit. Press the
[CLOSE]
key to exit directly without saving.
•
JOYSTICK RECOVER
ALL:
When ALL is selected, both the focus and iris will return to automatic operation after any
joystick command is received from the camera.
NONE:
When NONE is selected, the focus and iris will remain under manual control only. The
camera will not attempt to auto-focus the camera or operate the iris automatically.
FOCUS:
When FOCUS is selected, just the focus function will return to automatic mode when the
joystick is moved after a manual adjustment has been made. The iris will remain under manual
control.
IRIS:
When IRIS is selected, just the iris function will return to automatic mode when the joystick is
moved after a manual adjustment has been made. The focus will remain under manual control.
)
Procedure:
1. Call preset point 95 to enter the main menu.
2. Under
[PANTILT SETTING]
choose the
[PANTILT SETTING]
sub-menu, press
[OPEN]
to
confirm the selection and enter pan parameter set.
3. Under
[PANTILT SETTING]
choose the
[JOYSTICK RECOVER]
menu and press
[OPEN]
to
confirm the selection.
4. Up/down P/T to change the setting.
5. Press
the
[OPEN]
key to save and exit. Press the
[CLOSE]
key to exit directly without saving.
•
SPEED PROPORTIONAL
This function causes the speed at which the camera pans to decrease proportionately with the
amount of zoom applied; When the camera is zoomed out wide, it will pan at full speed. When the
camera is zoomed in far, the camera will pan slower.
)
Procedure:
1. Call preset point 95 to enter the main menu.
2. Under
[PANTILT SETTING]
choose the
[PANTILT SETTING]
sub-menu, press
[OPEN]
to
confirm the selection and enter pan parameter set.
3. Under
[PANTILT SETTING]
choose the
[SPEED PROPORTIONAL]
menu and press
[OPEN]
to confirm the selection.
4. Up/down P/T to change the setting.
5. Press
the
[OPEN]
key to save and exit. Press the
[CLOSE]
key to exit directly without saving.
•
INFRARED LIGHTING
The IR LEDs can either be turned on manually or set to turn on and off automatically as lighting
conditions change.
)
Procedure:
1. Call preset point 95 to enter the main menu.
2. Under
[PANTILT SETTING]
choose the
[PANTILT SETTING]
sub-menu, press
[OPEN]
to
confirm the selection and enter pan parameter set.
3. Under
[PANTILT SETTING]
choose the
[INFRARED LIGHTING]
menu and press
[OPEN]
to
confirm the selection.
4. Up/down P/T to change the setting.
5. Press
the
[OPEN]
key to save and exit. Press the
[CLOSE]
key to exit directly without saving.
•
INFRARED ARRAY
