v1.0 10/14/10
2
PACKAGE CONTENTS
This package contains:
One ST-POE-S16-120W Power over Ethernet switch
One AC power cord
One mounting kit (two brackets with screws)
Four rubber feet
One installation manual
PRODUCT DESCRIPTION
The ST-POE-S16-200W is a 16-port 10/100Mbps Ethernet
switch combined a with a standard
802.3af 16-port PoE capability. The unit incorporates an external 48VDC power supply. Each of
the PoE Ethernet ports can provide 15.4 watts of power as well as 10/100Mbps data transmission
over as CAT 5/ 5e /6 cables.
The ST-POE-S16-200W is a Power Source Equipment (PSE) and fully compatible with Powered
Devices (PD) that comply with the IEEE 802.3af PoE standard. The device enables users
to attach IEEE802.3af compliant devices such as wireless Access Points (APS), VOIP phone,
IP camera, printer and Network Attached Storage (NAS) directly to the unit without requiring
additional power on the network. The ST-POE-S16-200W was designed with home and small
business users in mind and is deal for installations where AC power is not available or not
cost-effective.
No configuration is required and installation is quick and easy. Support for Auto – MDI / MDI-X on
all of the ports eliminates the need for crossover connection to another switch or HUB.
Auto-Negotiation on each port senses the link speed of a network device (either 10 or 100) and
intelligently adjusts for compatibility and optimal performance.
This unit is designed for indoor use only.
FCC Warning
This device has been tested and found to comply with the regulations for Class B digital equipment
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with users guide, may cause harmful interference to radio communications.
Operation of this device in a residential area is likely to cause harmful interference, in which case
the user will be required to correct the interference at his/her own expense.
UL Warning
Elevated Operating Ambient Temperature – If installed in a closed or multi-unit rack assembly, the
operating ambient temperature of the rack environment may be greater than the room’s ambient
temperature. Therefore, consideration should be given to installing the equipment in an
environment compatible with manufacturer’s maximum rated ambient temperature.
Reduced Air Flow – Installation of equipment in a rack should be such that the amount of airflow
required for safe operation of the equipment is not compromised.
Mechanical Loading – Rack mounting should be done to prevent any hazardous conditions
associated with uneven/unbalanced loading.
