Network Video Recorder NVR Menu
17
Password
：
Password to log into the IPC. (If default password is not
admin, please change to the correct password.)
IP Address
：
IP address of IPC that will be added in the NVR.
Port
：
Port for accessing IPC. Default port is 8999.
Enable
：
Enable switch. This function will ‘Activate’ a channel; it does
not delete the current channels settings when disabled.
Search:
Click “Search”, NVR can search for IPC which support ONVIF in
the same LAN. The IPC that is searched will be listed. Double click any
IPC in the list, and the related channel info will populate.
PgUP/PgDn
：
To check all searched IPC by choosing PgUp/PgDn.
Save
：
To save current parameters.
Return
：
Return to the previous interface.
5.3.2.2 Preview Configuration
Click “Preview Config” in channel management interface, then the
interface of preview config will be displayed. It includes boot preview and
image preview config. As followed in picture 5-9:
Picture 5-9
Boot Preview
：
Supports image preview of window 1, 4, 6, 8, 9 and 16.
Preview Config
：
To set channel for preview. To show which window is
supported for preview channel.
Default
：
Restore all parameters of the preview config to default.
Save
：
Save parameters of preview config interface.
Return
：
Back to previous menu.
5.3.2.3 Encoding Parameters
This menu allows you to modify the specific encoding parameters for a
specific channel.
