10
Once the new password is entered and confirmed, click
SAVE
at the
bottom of the
MODIFY USER
window to lock in the new password and
return to the
ACCOUNT
menu.
NOTE:
It is strongly recommended to write down the new password
and keep it in a secure location. If the password has been changed
and forgotten or misplaced it will be virtually impossible for the user
to log into the NVR. In this case please contact SecurityTronix at:
(610)429-1821,
Press
3
for Tech Support, then press
2
.
In order to use the password reset service you must provide
credentials to verify that you are the authorized installer of this NVR.
Record Settings
CAMERA DISCOVERY
NOTE:
For this feature explanation, it is presumed that the NVR is
already properly connected to the network, and there are no data
restrictions in place preventing the NVR from communicating both
across the network, and outside to the WAN.
When connecting Securitytronix 4
th
Gen IP cameras directly to the
NVR’s built in PoE Switch, Simply connect the cameras and power on
the unit. The NVR will detect the cameras, and automatically configure
their network settings.
For Non Securitytronix Cameras, or for connecting to cameras not
directly connected to the built in PoE switch, refer to the steps below.
From the
MAIN MENU
, select
CAMERA
in the
SETTING
section, and
then select
REMOTE
on the left side of the window.
