ST-IP2VFB QUICK START GUIDE
15
15
2.
Drill screw holes in the wall according to the number one holes of
the drill template. Refer to the Figure 2-4.
Figure 2-4
Drilling Holes in the Wall
3.
If you need to route cables through the wall (or ceiling), cut a
cable hole according to the drill template. Skip this step, if you
want to route the cables on the surface of the ceiling.
4.
Route the cables of the camera.
5.
Secure the camera to the wall (or ceiling) with expansion screws.
Refer to the Figure 2-5.
Ceiling Mounting
1
1
1
1
2
2
2
2
1:Screw Hole for
Bracket
2:Screw Hole for
Mounting Base
