ST-IP2FTD QUICK START GUIDE
13
13
Three side outlets on the enclosure are selectable, which makes
routing the cables easier instead of drilling a cable hole on the
ceiling. Use a plier to remove the plastic
tab
and route the cables
through the hole.
3.
Connect the corresponding power/network cable.
4.
Fix the camera to the ceiling with the supplied expansion
screws.
Figure 2-4
Secure the Camera to the Ceiling
5.
Adjust the Lens.
1).
Loosen the lock screw.
2).
Rotate the enclosure to adjust the pan angle; rotate the
camera to adjust the tilt angle.
