Security Tronix ST-DVR7204G User Manual Download

Page: 88 / 89

v2.0 11/8/11

o. SNS log information is limited to Alarm Log messages and Operational Log messages.

Click the

Log button

and a Log screen with tabs for Alarm Log and Operational Log

appears.

p. For

Remote Device Configuration

click the

DeviceCFG button

. Allows the SNS remote

configuration of the DVR’s settings for

Recording

;

Alarms;

Video Motion, Video Blind, Video Loss and Alarm Input;

System Setup

: General, Encode, Network, NetService, CAM Name and PTZ

Config

Advanced

: Account, AutoMaintain, Default and Reboot

Info

: HDD Info, Log and Version

The settings process using SNS is very similar to using the DVR’s menus.
When done with each setting be sure to click

APPLY

to save the configuration.

A sample of one of the Remote Config screens is below.

Summary of Contents for ST-DVR7204G


























































































Search results

Summary of Contents for ST-DVR7204G

Reviews:

Related manuals for ST-DVR7204G

Brands by name

Popular brands

Security Tronix ST-DVR7204G, User Manual

Search results

Summary of Contents for ST-DVR7204G

Reviews:

Related manuals for ST-DVR7204G

Brands by name

Popular brands