Problem Correction
Troubleshooting
No power
Picture is dark or washed out
Picture appears scrambled or
characters are missing
Confirm power cord is connected
to monitor and both the front and
back panel power switches are on
Adjust brightness and contrast
controls on the monitor’s front
panel
Unplug monitor from the wall
outlet for five seconds to reset the
system
13
Monitor must be used indoors and never exposed to moisture.
Place monitor in a well ventilated environment that is free from
vibration and the possibility of any impact.
Use caution when mounting cameras on walls or ceilings. Always
confirm where existing utilities (electrical wires, gas pipes, etc.) are
located before installation.
Potentially lethal high voltage exists inside this device. Do not
remove the case or alter the power cord on the monitor.
Observe all local, state, and federal codes and standards
when installing and using this product.
