9
A :
represents “alarm record”
Use the ? and ? button to select items
Press
button to select the
O
/
X / A
(Fully / No / Alarm Record)
6. Event List
Press
key on “EVENT LIST” than windows will appear as below:
EVENT LIST
MASTER HARD DRIVE
> 01 2003/AUG/25 12:13:16 REC
02 2003/AUG/25 11:14:21 PWR
03 2003/AUG/25 10:03:04 MOT CH2
04 2003/AUG/25 09:35:24 ALM CH1
Use
“ ? “
key or
“ ? “
key to select event which needs to be played. The location of
“ >
“
symbol will move up and down for indicating current event which is selected. Once the
correct event is indicated, press ?
PLAY
key to start playing the video in normal speed.
There are 4 different types of events that will be recorded:
1. REC: Event starts when “REC” key is pressed or a timed recording.
2. PWR: System begins recording event after a power interruption and restart of the unit.
3. ALM: Event starts with an external trigger and displays the channel that was triggered.
4. MOT: Event starts recording with motion in the selected camera channels.
7. HDD management
HDD MANAGEMENT
>
OVERWRITE MODE NO
MASTER HDD CAPACITY
76GB
MASTER HDD LEFT RATIO
73GB 97%
MASTER HDD FORMAT
EXIT
Press the
MENU
button to enter the main menu.
Use the ? and ? button to select items.
Press the
button to confirm the selection or
increase highlighted selection number.
Press
MENU
or Select
EXIT
to escape the setup
mode.
Contents:
(1)
OVERWRITE MODE YES (NO)
Use
button to enable or disable overwriting when HDD is full.
When HDD overwrite is enabled, the oldest partition on the HDD will automatically be
reused, this means the oldest images will be overwritten by the current images.
When overwrite mode is disabled, the HDD Full Warning will appear and will need to