22
4.3.2 Slow Forward/Reverse
There are 4 speeds available for a slow playback: 1/2, 1/4, 1/8, 1/16. While playing back recorded video
at the recorded speed:
(1) Press the
PAUSE
button
for the slow playback mode.
(2)
Forward:
Turn the
Shuttle
dial
clockwise to view the recorded video in the forward direction
at a speed slower than the recorded speed. Each subsequent turn of the shuttle to the right
increases the forward rate, as 1/2, 1/4, 1/8, and 1/16.
(3)
Reverse:
Turn the
Shuttle
dial
counterclockwise to view the recorded video in the reverse
direction at a speed slower than the recorded speed. Each subsequent turn of the shuttle to the
left increases the reverse rate, as -1/2, -1/4, -1/8, and -1/16.
(4)
Normal:
Release the
Shuttle
dial
and then press the
PLAY
button
to return to the
normal speed of playback.
* You can also operate by using “<” button
and “>” button
.
4.3.3 Play Back Picture-by-Picture
While playing back recorded video at the recorded speed:
(1)
Press the
PAUSE
button
for the picture-by-picture mode.
(2)
There are two ways, by PAUSE button or by JOG, available to play in the picture-by-picture
mode, but the
PAUSE
button
can only function in a forward direction; the other,
JOG
dial
, can act in both a forward and a backward direction, as well as picture-by-picture.
By
PAUSE
button
:
Press the
PAUSE
button
to display one frame/field of a picture at a time in the
forward direction.
(When playing back video recorded by a multiplexer, each
sequential press of the PAUSE button
will display each camera in sequence.)
By
JOG
dial
:
Turn the
JOG
dial
clockwise to display one frame/field of a picture at a time in the
forward direction. Turn the
JOG
dial counterclockwise to display one frame/field of a
picture at a time in the backward direction.
(3) Press the
PLAY
button
to return to the normal speed of playback.
4.3.4 Play Back Recorded Video from an HDD in the Mobile Rack
To play back a recorded video from HD 2, take the following steps:
(1) Press the
Setup
button
to enter the setup menu.
(2) Select
DISK
and press the
Enter
button
to enter the
DISK SETTING
page.
(3) Set the
HD2 USAGE
to
REC
and then exit the setup menu.
(4) Use the search function to access desired recorded video. For specific operation details please
refer to Section 4.4 (Search Operations ).
