background image

2

INTRODUCTION

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

If you pour a cold liquid into a glass, water vapor
in the air will condense on the surface of the
glass. This is moisture condensation. Moisture
condensation on the head drum, one of the most
crucial parts of the unit, will cause  damage to the
tape.
When the VCR is exposed to a rapid temperature
change from cold to warm, some condensation
will occur. Under this condition, connect the power
cord to the AC line, press 

POWER/TIMER

button

on and allow at least two hours for the VCR to dry
out.

MOISTURE CONDENSATION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION : TO REDUCE THE RISK

OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK);

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The serial number is found on the back of this
unit. This number is unique to this unit and not
available to others. You should record requested
information here and retain this guide as a per-
manent record of your purchase.

Model No. 

Serial No. 

CAUTION :

TO PREVENT ELECTRIC SHOCK,

DO NOT USE THIS PLUG WITH AN EXTEN-
SION CORD, RECEPTACLE OR OTHER OUT-
LET UNLESS THE PLUG CAN BE FULLY
INSERTED WITHOUT EXPOSING ANY PARTS
OF THE BLADES.

This lightning flash with arrowhead sym-
bol within an equilateral triangle is intend-
ed to alert the user to the presence of
uninsulated dangerous voltage within the
product’s enclosure that may be of suffi-
cient magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an equilater-
al triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product. 

WARNING:

Do not install this equipment in a con-

fined space such as a bookcase or similar unit.

CAUTION:

The apparatus should not be exposed

to water (dripping or splashing) and no objects
filled with liquids, such as vases, should be placed
on the apparatus.

IMPORTANT COPYRIGHT INFORMATION: 

Many

television programs and films are copyrighted. In
certain circumstances, copyright law may apply to
private in-home video taping of copyrighted materi-
als.

Warning : This is a class A product . In a domestic environment this product 

may cause radio interference in which case the user may be 
required to take adequate measures.

Summary of Contents for SL840


































Reviews: