11
www.scdlink.com
SECTION 3: AIMING THE CAMERA
SECTION 3
Aiming the Camera
1. Connect the video cable from the camera to (a test monitor or to)
the BNC input on the DVR.
2. Connect the DC12V adapter to the camera.
3. Loosen the housing bezel until the housing can be rotated on
the base.
4. While observing the video from the camera, rotate the camera
housing and/or tilt the camera within the housing to point it at your
surveillance target.
5. Tighten the housing bezel to hold the camera in place.
6. If you have a CDC3114VF or CDC3114VF2 camera, use a small
blade screwdriver to adjust the focus and zoom if necessary.